
Rhino USA 1" x 10' Retractable Ratchet Straps (select 2 pack or 4 pack) - Medium Duty Self Retracting Tie Down Straps for Truck, Cargo Trailer
12.5%10%
Rhino USAVerified by GrowiVerified by TikTok Shop
Loading…

5%3%
$0.65 per sale
DDragontrust Auto ProductsVerified by GrowiVerified by TikTok Shop1 itemsThis is a 2-in-1 cup holder car mount. It can be directly placed into the original cup slot of the car center console. It serves two purposes: holding a cup and supporting a magnetic phone mount for navigation.
It offers a non-destructive installation that does not damage the original car interior. The bracket supports telescopic adjustment and 360° rotation, allowing you to easily switch between portrait and landscape modes to meet your navigation needs.
️
1. Ensure that the inner diameter of the original car cup holder is 7.5 cm (2.95 inches). The mount won’t fit if the cup slot is wider.
2. Firmly place the product's base into the car's original cup holder slot.
3. Loosen the adjustment knob, extend the bracket to your desired height, and adjust the angle of the magnetic head. Turn the knob to tighten it and lock the position after adjustment.
4. The magnetic head supports 360° rotation for quick switching between portrait and landscape screen modes.
5. The base still holds water cups and thermoses normally, so you can secure your phone without losing cup storage space.
Apple iPhones
·iPhone 11–16 series (bare phone): Built-in MagSafe magnets. No magnetic ring is required; the phone can attach directly.
· ️ When using a phone case: Attach the magnetic ring to the inside of the case or the back of the case to enable magnetic adhesion.
Android phones
·A magnetic ring must be applied whether you use the phone without a case or with one.
️ NOTES: Foldable phones are NOT compatible. DO NOT attach the magnetic ring to the bracket itself!
1. Attach the ring only to a flat, smooth surface. It will not adhere firmly to textured, uneven, or raised phone cases.
2. Thoroughly wipe the sticky area with a dry cloth to remove dust and oil before applying it.
3. Remove the adhesive backing, align the ring to the desired position, then press firmly for a period of time to ensure strong adhesion.
1. Adjust the phone's position before starting to drive. Do not operate the phone while the vehicle is in motion. Drive safely.
2. Regularly check whether the bracket and magnetic ring are loose to prevent your phone from falling off.
3. Do not leave the product exposed to prolonged high-temperature sunlight, as this will cause the adhesive to deteriorate.
4. Do not bend the bracket arm forcefully, otherwise the structure will be damaged.
5. Once the magnetic ring is stuck and forcibly removed, its adhesion performance will be reduced. Please confirm the position before attaching it.
Q: Is the phone unstable and keeps falling off?
A: ① Make sure the magnetic ring is attached to a flat, smooth surface and pressed firmly; ② Tighten all adjustment knobs on the bracket; ③ Align the magnetic head with the magnetic ring or the built-in magnet area of the phone.
Q: The base won’t fit into my car’s cup holder?
A: Base width 7.5 cm (2.95 in). Fits car armrest cup holders with an inner diameter of 6.5–8 cm for direct installation. If the cup holder opening is slightly small, manually squeeze both sides of the cup holder adapter to reduce its size for insertion.
Q: Why doesn’t my iPhone stick securely when I have a case on it?
A: Regular non-magnetic phone cases do not support MagSafe. You need to attach the magnetic ring to the back of the case. If you use a MagSafe-compatible case, there’s no need for a ring.
1. Main body of the bracket (cup base + adjustable bracket arm + magnetic head) ×1
2. Magnetic ring (metal adhesive plate) ×1
Overall height: 33 cm (12.99 inches) Base width: 7.5 cm
Material: ABS + silicone + strong magnet
Base width: 7.5 cm (2.95 in). Fits car armrest cup holders with an inner diameter of 6.5–8 cm for direct installation. If the cup holder opening is slightly small, manually squeeze both sides of the cup holder adapter to reduce its size for insertion.




12.5%10%
Rhino USAVerified by GrowiVerified by TikTok Shop

5.5%1%
overwhelming ordersVerified by GrowiVerified by TikTok Shop

12%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

9%8%
LISEN-USVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

13%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

14%10%
LUTU Automotive electronicsVerified by GrowiVerified by TikTok Shop

13%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

12%10%
Joytutus AutohomeVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

5%3%
$0.65 per sale
DDragontrust Auto ProductsVerified by GrowiVerified by TikTok Shop1 itemsThis is a 2-in-1 cup holder car mount. It can be directly placed into the original cup slot of the car center console. It serves two purposes: holding a cup and supporting a magnetic phone mount for navigation.
It offers a non-destructive installation that does not damage the original car interior. The bracket supports telescopic adjustment and 360° rotation, allowing you to easily switch between portrait and landscape modes to meet your navigation needs.
️
1. Ensure that the inner diameter of the original car cup holder is 7.5 cm (2.95 inches). The mount won’t fit if the cup slot is wider.
2. Firmly place the product's base into the car's original cup holder slot.
3. Loosen the adjustment knob, extend the bracket to your desired height, and adjust the angle of the magnetic head. Turn the knob to tighten it and lock the position after adjustment.
4. The magnetic head supports 360° rotation for quick switching between portrait and landscape screen modes.
5. The base still holds water cups and thermoses normally, so you can secure your phone without losing cup storage space.
Apple iPhones
·iPhone 11–16 series (bare phone): Built-in MagSafe magnets. No magnetic ring is required; the phone can attach directly.
· ️ When using a phone case: Attach the magnetic ring to the inside of the case or the back of the case to enable magnetic adhesion.
Android phones
·A magnetic ring must be applied whether you use the phone without a case or with one.
️ NOTES: Foldable phones are NOT compatible. DO NOT attach the magnetic ring to the bracket itself!
1. Attach the ring only to a flat, smooth surface. It will not adhere firmly to textured, uneven, or raised phone cases.
2. Thoroughly wipe the sticky area with a dry cloth to remove dust and oil before applying it.
3. Remove the adhesive backing, align the ring to the desired position, then press firmly for a period of time to ensure strong adhesion.
1. Adjust the phone's position before starting to drive. Do not operate the phone while the vehicle is in motion. Drive safely.
2. Regularly check whether the bracket and magnetic ring are loose to prevent your phone from falling off.
3. Do not leave the product exposed to prolonged high-temperature sunlight, as this will cause the adhesive to deteriorate.
4. Do not bend the bracket arm forcefully, otherwise the structure will be damaged.
5. Once the magnetic ring is stuck and forcibly removed, its adhesion performance will be reduced. Please confirm the position before attaching it.
Q: Is the phone unstable and keeps falling off?
A: ① Make sure the magnetic ring is attached to a flat, smooth surface and pressed firmly; ② Tighten all adjustment knobs on the bracket; ③ Align the magnetic head with the magnetic ring or the built-in magnet area of the phone.
Q: The base won’t fit into my car’s cup holder?
A: Base width 7.5 cm (2.95 in). Fits car armrest cup holders with an inner diameter of 6.5–8 cm for direct installation. If the cup holder opening is slightly small, manually squeeze both sides of the cup holder adapter to reduce its size for insertion.
Q: Why doesn’t my iPhone stick securely when I have a case on it?
A: Regular non-magnetic phone cases do not support MagSafe. You need to attach the magnetic ring to the back of the case. If you use a MagSafe-compatible case, there’s no need for a ring.
1. Main body of the bracket (cup base + adjustable bracket arm + magnetic head) ×1
2. Magnetic ring (metal adhesive plate) ×1
Overall height: 33 cm (12.99 inches) Base width: 7.5 cm
Material: ABS + silicone + strong magnet
Base width: 7.5 cm (2.95 in). Fits car armrest cup holders with an inner diameter of 6.5–8 cm for direct installation. If the cup holder opening is slightly small, manually squeeze both sides of the cup holder adapter to reduce its size for insertion.




12.5%10%
Rhino USAVerified by GrowiVerified by TikTok Shop

5.5%1%
overwhelming ordersVerified by GrowiVerified by TikTok Shop

12%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

9%8%
LISEN-USVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

13%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

14%10%
LUTU Automotive electronicsVerified by GrowiVerified by TikTok Shop

13%10%
YOYOWAYVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop

12%10%
Joytutus AutohomeVerified by GrowiVerified by TikTok Shop

12.5%10%
Joytutus AutoPartsVerified by GrowiVerified by TikTok Shop